By Chris Chambers
So energy prices are going up again!! Do you
think there is nothing you can do about it? The best and most
satisfying thing you can do is to use less energy - here are our energy
saving tips and we promise we won't advise putting on a jumper and turning your thermostat down!
1) Light bulbs - I've banged on about this one in several of my blogs -
get rid of all your old incandescent light bulbs (the classic old
shaped ones) including any GU10 / MR16 bulbs which are not LED or CFL.
They are only about 90% efficient! That means for every pound you give
an energy company for powering an incandescent bulb you're only getting
10 pence of useful energy in return!! LED maybe more expensive (and more
so for dimmable ones) but you'll never have to replace them (when it
comes to LED spots you want a bulb that is at least 250 lumens to be
equivalent to a typical 40w GU10). CFL bulbs have got better - they
don't take very long to warm up and they're no longer the horrible white
harsh colour they used to be. Check out this calculator below for some
revealing stats on inefficient light bulbs.
http://environment.nationalgeographic.co.uk/environment/energy/great-energy-challenge/light-bulb-savings-calculator/
2) Draft excluding: if you have a 1mm gap all around an average sized
external door then that is equal to a square that is getting on for
about 7cm by 7cm - if you actually had a visible hole in your front door
which was that that size then you'd soon cover it up!! Gaps around
doors, letterboxes and windows are frequently bigger than 1mm so get
some draft-proofing installed.
3) Loft insulation: the
recommended depth for mineral wool insulation is 270mm. Check your loft -
chances are you don't have enough! And don't compress it as this
reduces its insulating properties. Boarding lofts and using them for
storage is unfortunately not very energy efficient - can you create a
simple raised section in your loft space to store items on with room for
insulation underneath?
http://www.energysavingtrust.org.uk/Insulation/Roof-and-loft-insulation
4) Change your hob for an induction
electric hob? This is an especially good option if you are in the process or thinking of upgrading your kitchen. Induction hobs are brilliant - very efficient, no wasted
heat and very controllable. If you thought you'd never want an electric
hob over a gas one then think again!
5) Boiler replacement:
This is a bit pricey but the cost of replacement of a very old and
inefficient boiler will be returned in energy savings over only a few
years. Check your boiler's efficiency here: http://www.boilers.org.uk/
6) Get an energy assessment done - most people associate energy
assessments with selling or letting houses but they provide very useful
information and advice bespoke to a particular property.
If
you're in Somerset or Dorset and whether you're a homeowner, landlord or
tenant, Proudhouse Property Management can conduct an energy assessment
for you and also advise on how to access the Government's "Green Deal"
or ECO schemes.
Domestic property news and discussion of interest to any homeowner, landlord or tenant. www.proudhouseproperty.co.uk
Showing posts with label incandescent. Show all posts
Showing posts with label incandescent. Show all posts
Sunday, 20 October 2013
Wednesday, 25 September 2013
Get rid of the Grid??
By Chris Chambers
![]() |
| All that power going to waste |
Yesterday (24th Sep 2013) Ed Miliband announced that the Labour Party would freeze energy bills until 2017! Hmmm... I think the energy companies might have other ideas - it's a nice idea but there is a hell of a lot of infrastructure to maintain and that maintenance isn't free. Furthermore, and more importantly, the Energy Companies need money to invest in and develop energy generation for the future. So freezing energy bills is not good for the consumer... free insulation programmes, the Energy Company obligation, and investment in renewable technologies (things that are all good for the consumer) are funded by the energy companies. Freezing energy prices could have a really bad effect on energy consumption and generation.
So is what Ed saying practical in any way?
So is what Ed saying practical in any way?
How about relying less on the infrastructure?
Use less energy!! I cannot believe the number of homes that still have incandescent lamps in the majority of their lampholders (see my earlier post). I conduct energy assessments, Electrical Installation Condition Reports (EICR) and help landlords prepare properties for letting so I go into a lot of homes... where are the CFL and LED lamps? Often there are only 2 - the 2 free CFL bulbs that everyone received free in the post a few years ago and usually they are in the hallway and the landing... the technology has improved and they do save you money so promoting this should be a priority.
But here is a really BIG, crazy, pie-in-the-sky idea:
The national grid is only about 33% efficient - that's to say that only a third of the energy released from burning fossil fuel actually gets put to useful work in homes, commercial and industrial properties. That is a shocking yet strangely accepted statistic - I'm not aware of any initiatives to change this - it is just an immutable fact.
I think the era of large scale power production should be brought to a close. For domestic properties especially, there is no reason why a network of community heat & power, micro-generation and renewables cannot provide "cells" of localised power generation. Surplus energy from domestic Solar panels on individuals houses should not feed an into an expensive large-scale national grid - what a waste of a wonderful resource! Energy derived from daylight, at point of use, being fed directly into a network which is only 33% efficient and fed largely by dirty carbon! Wouldn't it be better if it was fed into power for the local community?
Large power output generators are needed for heavy commercial and industrial units that need the consistent high power output that a national grid provides - so the role of the traditional power station will probably have to remain. But domestic properties with their diurnal low power demand should be on a separate system.
So, instead of freezing energy bills why not force the energy companies to invest in down-scaling the national grid and providing local and renewable power generation within domestic communities - generate power much closer to the point of use and cut down on huge transmission losses.
Just an idea... could this work? I'd love to hear peoples' thoughts and comments.
Chris Chambers is the owner of Proudhouse Property Management LLP: Providing Lettings & Management services, Green Deal advice and Energy Assessments to Homeowners, Landlords and Tenants in Yeovil, Sherborne, Dorset and Somerset.
Thursday, 16 May 2013
"Save The Incandescent Lightbulb"... Really?!??!
By Chris Chambers
Apparently, in the U.S, Green labelling of products is turning people off purchasing energy efficient lightbulbs - there is even a political "save the incandescent light" lobby! A study has found that many consumers would rather buy an incandescent lightbulb than a cheaper-to-run energy saving equivalent - clearly "Green" is still not cool in the U.S.
I thought I'd share some thoughts on this. In the photo below from left to right:
1) Old style incandescent bulb: These are only about 5% efficient! The design has not changed in about 120 years. Really, honestly and truly, get rid of these if you have them - most of the electrical energy is converted to heat.
2) Incandescent halogen (GU10): About 15-45% efficient. The filaments last longer as the halogen gas deposits tungsten back onto the filament which prevents it getting weaker over time. They also reach a higher temperature and are brighter than standard incandescent. Tall people watch your heads, especially if you're bald - I really have seen a scalded scalp from someone standing on a chair whose head touched a halogen downlighter!
3) and 4) CFL Lighting. These use about a fifth of the power of a standard incandescent lightbulbs. Their efficiency more than makes up for their purchase cost over time. The tubular ones (4) are a bit more efficient. When these were first introduced people were put off by the long warm up time and the very harsh colour - more modern ones have addressed these issues. They contain mercury - a tiny miniscule amount - nonetheless, they should be recycled. If you break one then do some sensible stuff like ventilate the room, keep pets and children away until it's all cleaned up and discard any clothing that may have been contaminated.
5) LED (GU10) - these use about 90% less energy than a standard incandescent bulb! They're cold to touch. They're expensive but coming down in price. If you upgrade to these then consider the lumens rating; as a rough guide you need about 150 lumens per square meter (for general domestic illumination). They last up to 25,000 hours possibly more. As they don't get hot they are inherently so much safer - especially when installed in downlighters in ceiling voids/lofts.
If you read this far then thank you! Check out this really cool website:
Light Bulb Savings Calculator
For my home these were the (gob-smacking) results:
You have 3 more light bulbs than the average U.S. household.
- It would save $12,706,495,632 in energy costs.
- It would be like shutting down 18 coal power plants.
- It would be like taking 13,753,910 cars off the road.
- It would reduce CO2 emissions by 70,144,945 metric tons
- It would cut emissions equivalent to 381,949 railcars of coal
Chris Chambers is the owner of Proudhouse Property LLP and Wigglies - Electrical Services. Creating and developing innovative homes in Somerset and South West England.
Apparently, in the U.S, Green labelling of products is turning people off purchasing energy efficient lightbulbs - there is even a political "save the incandescent light" lobby! A study has found that many consumers would rather buy an incandescent lightbulb than a cheaper-to-run energy saving equivalent - clearly "Green" is still not cool in the U.S.
I thought I'd share some thoughts on this. In the photo below from left to right:
1) Old style incandescent bulb: These are only about 5% efficient! The design has not changed in about 120 years. Really, honestly and truly, get rid of these if you have them - most of the electrical energy is converted to heat.
2) Incandescent halogen (GU10): About 15-45% efficient. The filaments last longer as the halogen gas deposits tungsten back onto the filament which prevents it getting weaker over time. They also reach a higher temperature and are brighter than standard incandescent. Tall people watch your heads, especially if you're bald - I really have seen a scalded scalp from someone standing on a chair whose head touched a halogen downlighter!
3) and 4) CFL Lighting. These use about a fifth of the power of a standard incandescent lightbulbs. Their efficiency more than makes up for their purchase cost over time. The tubular ones (4) are a bit more efficient. When these were first introduced people were put off by the long warm up time and the very harsh colour - more modern ones have addressed these issues. They contain mercury - a tiny miniscule amount - nonetheless, they should be recycled. If you break one then do some sensible stuff like ventilate the room, keep pets and children away until it's all cleaned up and discard any clothing that may have been contaminated.
5) LED (GU10) - these use about 90% less energy than a standard incandescent bulb! They're cold to touch. They're expensive but coming down in price. If you upgrade to these then consider the lumens rating; as a rough guide you need about 150 lumens per square meter (for general domestic illumination). They last up to 25,000 hours possibly more. As they don't get hot they are inherently so much safer - especially when installed in downlighters in ceiling voids/lofts.
If you read this far then thank you! Check out this really cool website:
Light Bulb Savings Calculator
For my home these were the (gob-smacking) results:
You have 3 more light bulbs than the average U.S. household.
You use
35.6 more efficient bulbs than the average.
You are likely
saving about
$112.45 more than the average U.S. household eachyear on lighting energy, due to your choice of bulbs.
If every household in the United States took the same steps on lighting efficiency: - It would save $12,706,495,632 in energy costs.
- It would be like shutting down 18 coal power plants.
- It would be like taking 13,753,910 cars off the road.
- It would reduce CO2 emissions by 70,144,945 metric tons
- It would cut emissions equivalent to 381,949 railcars of coal
Chris Chambers is the owner of Proudhouse Property LLP and Wigglies - Electrical Services. Creating and developing innovative homes in Somerset and South West England.
Labels:
bulb,
calculator,
CFL,
dlownlight,
downlighters,
efficiency,
energy,
green,
halogen,
incandescent,
lamp,
LED,
lightbulb,
lighting,
lumen,
savings,
States,
U.S,
United
Subscribe to:
Posts (Atom)
